Reported by briang1 on 2013-06-01 07:59

The version I installed is LibreOffice_4.0.3_Win_x86.msi
And the help package that went with it...
Basically when you install Libra Office the first thing to check up on is
that you ticked the accessability checkbox just before you commit to the
install. You have to tab for this so watch you do not miss it

If like me you are using XP with the old Java Access bridge installed, when
Libra Office is installed it will probably not actually work. Here is what
to do.
Using explorer go into the program files folder, and into the java access
bridge folder.
Run the file installer.exe, and wait till its finished checking the disc.
Now restart the computer and try Libra Office again.

This time it should present you with buttons for the various bits of the
software.

I have thus far tried writer, ie text document, and bar some menu options
which trigger not implimented errors in nvda ( see below), it seems to
work.

Note that the say all does not work correctly. In this case it does not move
the cursor when reading the file and only reads around a page at a time.
This is irritating, but seems to be a problem in all these Open Office
derived programs.

Occasionally, errors occur when in the text editor or when returning to it
from a command. My feeling is that this may well be a timing issue on slow
machines though, as it does eventually seem to sort itself out or will if
you switch away and back again.

I'll leave it there as I'm sure there are plenty of folk who love trying
stuff.

This was the auto correct options, for which i could only find one option
and it was checked, but unchecking it then makes the following error when
you attempt to tab to the apply button.
At least that is what was there before!

IO - inputCore.InputManager.executeGesture (12:04:27):
Input: kb(desktop):downArrow
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:27):
states: enabled,focusable,opaque,sensitive,showing,visible
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:27):
states:
enabled,focusable,focused,opaque,selectable,selected,sensitive,showing,visible
IO - speech.speak (12:04:27):
Speaking ('en_GB'), u'AutoCorrect menu selected'
IO - inputCore.InputManager.executeGesture (12:04:29):
Input: kb(desktop):enter
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:29):
states:
enabled,focusable,focused,opaque,selectable,selected,sensitive,showing,visible
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:29):
states:
enabled,focusable,opaque,selectable,selected,sensitive,showing,visible
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:29):
states:
checked,enabled,focusable,focused,opaque,sensitive,showing,visible,armed
IO - speech.speak (12:04:29):
Speaking ('en_GB'), u'While Typing checked'
IO - inputCore.InputManager.executeGesture (12:04:33):
Input: kb(desktop):enter
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:33):
states:
checked,enabled,focusable,focused,opaque,sensitive,showing,visible,armed
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:34):
states: checked,enabled,focusable,opaque,sensitive
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:35):
states: enabled,sensitive,showing,visible
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:35):
states: enabled,sensitive,showing,visible
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:35):
states: editable,enabled,multiselectable,opaque,showing,visible
IO - speech.speak (12:04:35):
Speaking ('en_GB'), u'Document view document editable'
DEBUG - NVDAObjects.JAB.JAB._get_states (12:04:35):
states: enabled,focusable,opaque,selectable,sensitive,showing,visible
DEBUG - NVDAObjects.JAB.JAB.get_states (12:04:35):
states: enabled,focusable,opaque,selectable,sensitive,showing,visible
IO - speech.speak (12:04:35):
Speaking ('en_GB'), u'Format menu'
DEBUG - NVDAObjects.JAB.JAB.get_states (12:04:35):
states: enabled,focusable,opaque,selectable,sensitive
IO - speech.speak (12:04:35):
Speaking ('en_GB'), u'AutoCorrect menu'
IO - speech.speak (12:04:35):
Speaking ('en_GB'), u'Format menu'
IO - inputCore.InputManager.executeGesture (12:04:38):
Input: kb(desktop):tab
DEBUG - NVDAObjects.JAB.JAB.get_states (12:04:38):
states: enabled,focusable,opaque,selectable,sensitive,showing,visible
DEBUG - NVDAObjects.JAB.JAB.get_states (12:04:38):
states: enabled,focusable,opaque,selectable,sensitive,showing,visible
ERROR - eventHandler.executeEvent (12:04:38):
error executing event: caret on
<NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionJAB object at
0x03F90CF0> with extra args of {}
Traceback (most recent call last):
File "eventHandler.pyc", line 136, in executeEvent
File "eventHandler.pyc", line 84, in init
File "eventHandler.pyc", line 91, in next
File "compoundDocuments.pyc", line 410, in event_caret
File "compoundDocuments.pyc", line 387, in makeTextInfo
File "compoundDocuments.pyc", line 216, in init
File "NVDAObjects__init.pyc", line 903, in makeTextInfo
File "textInfos\offsets.pyc", line 280, in init
File "textInfos\offsets.pyc", line 159, in getCaretOffset
NotImplementedError
ERROR - eventHandler.executeEvent (12:04:38):
error executing event: caret on
<NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionJAB object at
0x03F90F90> with extra args of {}
Traceback (most recent call last):
File "eventHandler.pyc", line 136, in executeEvent
File "eventHandler.pyc", line 84, in init
File "eventHandler.pyc", line 91, in next
File "compoundDocuments.pyc", line 410, in event_caret
File "compoundDocuments.pyc", line 387, in makeTextInfo
File "compoundDocuments.pyc", line 216, in init
File "NVDAObjects__init.pyc", line 903, in makeTextInfo
File "textInfos\offsets.pyc", line 280, in init
File "textInfos\offsets.pyc", line 159, in getCaretOffset
NotImplementedError
DEBUG - NVDAObjects.JAB.JAB.get_states (12:04:39):
states: enabled,focusable,opaque,selectable,sensitive,showing,visible
ERROR - eventHandler.executeEvent (12:04:39):
error executing event: caret on
<NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionJAB object at
0x03F90CD0> with extra args of {}
Traceback (most recent call last):
File "eventHandler.pyc", line 136, in executeEvent
File "eventHandler.pyc", line 84, in init
File "eventHandler.pyc", line 91, in next
File "compoundDocuments.pyc", line 410, in event_caret
File "compoundDocuments.pyc", line 387, in makeTextInfo
File "compoundDocuments.pyc", line 216, in init
File "NVDAObjects__init.pyc", line 903, in makeTextInfo
File "textInfos\offsets.pyc", line 280, in init
File "textInfos\offsets.pyc", line 159, in getCaretOffset
NotImplementedError
ERROR - eventHandler.executeEvent (12:04:39):
error executing event: caret on
<NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionJAB object at
0x03F90450> with extra args of {}
Traceback (most recent call last):
File "eventHandler.pyc", line 136, in executeEvent
File "eventHandler.pyc", line 84, in init
File "eventHandler.pyc", line 91, in next
File "compoundDocuments.pyc", line 410, in event_caret
File "compoundDocuments.pyc", line 387, in makeTextInfo
File "compoundDocuments.pyc", line 216, in init
File "NVDAObjects__init.pyc", line 903, in makeTextInfo
File "textInfos\offsets.pyc", line 280, in init
File "textInfos\offsets.pyc", line 159, in _getCaretOffset
NotImplementedError
IO - inputCore.InputManager.executeGesture (12:04:46):
Input: kb(desktop):control+alt+r
IO - speech.speak (12:04:46):
Speaking ('en_GB'), u'reboot nvda with log terminal'
IO - speech.speak (12:04:46):
Speaking ('en_GB'), u'blank'
INFO - core.main (12:04:47):
Exiting

This was with the latest version of the master branch.